Hallo,
da ich zwar hier gesucht, aber bisher nichts gefunden habe, mache ich mal den thred auf. Bitte löschen, wenn er überflüssig ist.
Den Micro Rock Crawler kennt ja wohl mittlerweile jeder schon - nur haben tut ihn noch keiner. Meiner sollte noch vor Weihnachten kommen. Über das Original hört man, na ja, nichts besonderes, aber ............ wozu gibts Tuning ;).
Ich finde doch, nachdem ich das gesehen habe, dass sich aus dem was machen läßt.
Aber seht selbst (rechts die gemoddete Version):
[Blockierte Grafik: http://i601.photobucket.com/albums/tt96/icecreamslick/LosiCrawlerModifications4.jpg]
1) Losi Mini-T ball ends and threaded rods replaced the upper and lower links. This lengthened and lowered the truck.
2) Cut the drive shafts, put each end in a section of aluminum tube with a little CA and added a section of black heat shrink to cover.
3) Cut small sections of nitro fuel tubeing and slid them onto the output yolks to keep them from snapping off.
4) Drilled out the chassis holes made for the ESC/battery mounting platforms and used them for the upper shock mounts.
5) After removing the tires from the wheels, I cut the foam down to about half and installed lead weights around the inside of the wheels.
6) Installed red Micro-T shock springs (stretched to stock length).
Now it is longer, the wheels are weighted and the foams allow the tires to compress more. It seems better and the COG is definitely lower, but it does bottom out more often. Still tweaking...
Grüße aus München
myrna